Equipment Listing

EquipmentQuantity
Nitrogen Equipment
180 K N2 Unit2 ea.
90 K N2 Unit1 ea.
2100 USG LN2 Tanks8 ea.
5500 USG LN2 Transporters1 ea.
7500 USG LN2 Transporters1 ea.
13000 USG LN2 Storage tank1 ea.
One-year spare parts1 set
1” & 2” H.P Hoses different working Pressure up to 5000 PSI 3 Sets
Nitrogen Ambient Vaporizer1 ea.
Commissioning Leak Test Package (CLT):
CLT Air Conditioned Container Complete with:

Console type VARIAN VS Helium Leak Detector (Maintenance free Mass- spectrometer)

Air driven Gas Booster Pump 6000 PSI

Hand held leak detector LACO

Power Probe spares

Power Probe Hoses

CLT PVC Tape

O2 Meter

1 ea.
Pipeline Service Equipment Package: 
Air Drying Plant (+ 3 Cº Dew Point) 1200 SCFM @ 10 bar1ea.
Atlas Copco compressor 352 SCFM @ 10 Bar6 ea.
Refrigerant Dryer 1300 SCFM @ 10 bar1 ea.
Manifold1 ea.
2” Air Hoses1 set
Air Drying Plant (- 40 Cº Dew point) 1600 SCFM @ 10 Bar

IR Compressor 1600 SCFM

IR after Cooler and Descente dryer

1ea.
2” Air Hoses1 set
IR Compressor 24 Bar, 900 SCFM1 ea.
Dew Point meter2 ea.
High Pressure Fluid Pumps:
SPM   3 ½” “500 HP” High Pressure fluid pump2ea.
SPM   4” “500 HP” High Pressure fluid pump2ea.
2” Iron (10, 8 & 4 ft.) joint, Loop, Swivel & Valves.3 Set
Hoses 4” & 2” (low & high pressure)3 Set
One-year spare parts1 Set
Chemical Transfer Pumps
S.S Chemical Cleaning, Centrifugal Pump Skid, Electric driven 60 m3/hr. @ 12 bar1 ea.
C.S Chemical Centrifugal Pump Skid, electric driven 93 m3/ hr. @ 7 bar2 ea.
C.S Multi Stage Pump, Electric Driven 232 GPM @ 60 bar1 ea.
C.S Multi Stage Pump, Electric driven 265 GPM @ 37 Bar1 ea.
Acid Transfer Pumps2 ea.
S.S Oil Flushing Package
S.S Tank with Heating System 36 KW and electric control Panel Skid2 ea.
Storage and Mixing Tanks
7500 USG (180 BBL) Storage and mixing tanks2ea.
11,750 USG (280 BBL) Storage and mixing Tanks1 ea.
1300 USG Raw Acid Storage Tanks9ea.
Batch Mixing (50,100 BBL)2 ea.
12000 USG (285 BBL) Storage Tanks4 ea.
3 m3 Chemical Mixing Tank, Zero Dead Volume and internal scale complete with crash frame3 ea.
Hydrostatic Test Instrument 
Standard Pressure gauges with Valid Calibration certificates 0 – 700 bar2ea.
Standard Pressure gauges with Valid Calibration certificates 0 – 200 bar2ea.
Standard Pressure gauges with Valid Calibration certificates 0 – 100 bar2 ea.
Standard Pressure Gauges with Valid Calibration Certificates 0 – 60 bar2 ea.
Pressure Chart Recorder with Valid Calibration certificates 0 – 700 bar2 ea.
Pressure Chart Recorder with Valid Calibration certificates 0 – 200 bar2 ea.
Pressure Chart Recorder with Valid Calibration certificates 0 – 100 bar2 ea.
Pressure Chart Recorder with Valid Calibration certificates 0 – 60 bar2 ea.
Temperature Chart recorder with calibration certificates 0- 100 Cº3 ea.
Dead Wight tester 50 PSI up to 10,000 PSI1 ea.
Filtration Unit
Duplex Filter Unit2 ea.
Monitoring System
Complete Data

Acquisition systems

2 ea.
Transportation System 
Trucks, Trailers, Cranes and 4×4 Light vehicles for Equipment and Personnel Transportation

Mechanical Equipment Packages

Item

 

DescriptionQty.Part no
1

Hydraulic Power Head Model 25XLT – square drive 2.5’’

 2HY25XLT
2Hydraulic Power Head Model 10XLT – square drive 1.5’’2HY10XLT
3Hydraulic Power Head Model 8XLT – square drive 1.5’’1HY8XLT
4Hydraulic Power Head Model 3MXT – square drive 1’’1HY3MXT
5Hydraulic Power Head Model AVANTI1 – square drive 3/4’’1HYAVANTI1
 6 6PT impact sockets – across flat up to 145MM – square drive 2.5inch2 Sets
76PT impact sockets – across flat up to 105MM – square drive 1.5inch2 Sets
86PT impact sockets – across flat up to 65MM – square drive 1inch1 Set
96PT impact sockets – across flat up to 46MM – square drive 3/4inch1 Set
10

Hydraulic Power Head Model 14XLCT

114XLCT
11Ratchet link Model 14XLCTLK115mm114XLCTLK115mm
12Hydraulic Power Head Model 8XLCT18XLCT
13Ratchet link Model 8XLCTLK100mm18XLCTLK100mm
14Hydraulic Power Head Model 4XLCT14XLCT
15

Ratchet link Model 4XLCTLK2-9/16’’

 14XLCTLK209
16Hydraulic Power Head Model Stealth41Stealth4
17Ratchet link Model Stealth4LK65mm1Stealth4LK65mm
18Hydraulic Power Head Model 2XLCT12XLCT
19Ratchet link Model 2XLCTLK55mm12XLCTLK55mm
20Air Driven Pump 700 bar6JET AIR RSST
21Twin line Hydraulic hose 5mt10090172S
22Mechanical Nut splitter for size range 29 to 57mm2HNS225
23Mechanical Nut splitter for size range 12.7 to 38.1mm2HNS150
24Hand Pump 700 Bar4P55
25Hydraulic Hose 1.8mt49764
26Flange spreader1
27Boltensioner Hydraulic Cylinder T2320BT-CA1-T23
28Conversion kit for size 1-5/8’’20BT-1625-BPS
29Boltensioner Hydraulic Cylinder T2420BT-CA1-T24
30Conversion kit for size 2-1/2’’20BT-2500-BPS
31

Boltensioner Hydraulic Cylinder T27

 20BT-CA1-T27
32Conversion kit for size 4’’20BT-4000-BPS
33Air driven Hydraulic Pump 1500 Bar for Boltensioner2BT-1506
34Hydraulic Hose 1500 bar 5mtSetsBT-1540-5
35Tee Block1BT-1547
36Interconnect hose 1.5mtSetsBT-1548-1.5
37Electronic Torque Recorder TDS 40004TDS 4000

Equipment Specifications

Ambient Vaporizer

TypeAmbient Vaporizer
Length6.058m
Width2.438m
Height2.591m
Weight3,500 kg
Capacity850 Nm³/hr. continuous flow / 1,700 Nm³/hr. during 8 hours
Minimum Vaporizer Operating Pressure12 barg
Maximum Vaporizer Operating Pressure40 barg
Pneumatic test pressure57.5 barg

2. Leak Test Cabin

TypeAir Conditioned Leak Test Portable Cabin
Length3.6 m
Width2.4 m
Height2.6 m
Weight3,00 kg
FunctionUsed for CLT and Hydrostatic Test Activities
Maximum Header Pressure  10,000 PSI
Electric power220 Volt Single Phase / 380 Volt Three Phase

3.Oil Free High Pressure Air Compressor:

ModelXHP 900 WCAT
TypeOil Free Air Compressor
Length2.65 m
Width2.00 m
Height2.40 m
Estimated Weights8,000 Ibs (4.00 ton)
Maximum Pressure350 PSI
Maximum Flow900 SCFM
Engine TypeDiesel driven, Caterpillar 3406 TA

4. Mechanical Equipment:

A. Bolt hydraulic torque (Power Heads with Square Drive)

ModelHP I300 WCU T1 Non-Electric

ModelPower Head 25XLT
Torque35,100 N.M
Square drive2.5 inch
Weight29.8 kg
Advantages  Universal double swivel 360

Anti-back lash mechanism

ModelPower head 10MXT
Torque15,617 N.M
Square drive1.5 inch
Weight14.76 kg
Advantages Universal double swivel 360*180°

 Anti-back lash mechanism

ModelPower head 8XLT
Torque4,379N.M
Square drive1 inch
Weight4.86 kg
Advantages  Universal double swivel 360*180°

Anti-back lash mechanism

typeOil Free Air Compressor
Length3.65 m
Width2.44 m
Height  2. 50 m
Estimated weight 12,000 IBS. (6.00 ton)
Maximum Pressure 150 PSI.
Maximum Flow1300 SCFM
Engine TypeDiesel Driven, Cummins NTA I4-C460
Advantages  Universal double swivel 360*180°

Anti-back lash mechanism

TorquePower head AVANTI 1
Torque1,741 N.M
Square drive3/4 inch
Weight1.49 kg
Advantages  Universal double swivel 360*220°

Anti-back lash mechanism

ModelSocket set
Socket set6PT impact socket – across flat till size 145mm

B. Bolt hydraulic torque (Power Heads with Hexagonal Cassette)

ModelPower head 14XLCT
Torque18,165 N.M
Size rangefrom 50 to 120 mm or

from 2 to 4 5/8 inch

Weight5.2 kg
Advantages  Universal double swivel 360*360°

Anti-back lash mechanism

ModelRatchet set
Ratchet setRatchet link for limited clearance 6pt- till size 115mm
ModelPower head 8XLCT
Torque11,049 N.M
Size rangeSize range: from 41 to 100 mm or

from 1 5/8 to 3 7/8 inch

Weight3 kg
Advantages Universal double swivel 360*360°

Anti-back lash mechanism

ModelPower head 8XLCT
Torque5,226 N.M
Size rangeSize range: from 27 to 80 mm or

from 1 1/16 to 3 1/8 inch

Weight1.9 kg
Advantages  Universal double swivel 360*360°

Anti-back lash mechanism

ModelPower head 2XLCT
Torque2,318 N.M
Size rangeSize range: from 19 to 65 mm or

from 3/4 → 2-9/16 inch

Weight0.9 kg
Advantages  Universal double swivel 360*360°

Anti-back lash mechanism

ModelPower head Stealth 4
Torque5,437 N.M
Size rangeSize range: from 36 to 85 mm or

from 1 7/16 to 3 3/8 inch

Weight1.81 kg
Advantages  Universal double swivel 360*180°

Anti-back lash mechanism

Twin Piston

 

C. Bolt hydraulic torque (Pumps)

ModelJet Air Pump RSST
Jet Air Pump RSSTJet Air Hydraulic Pump 4-6 bar with air supply regulator
Water Trap filter
4 Port
Double Acting
Inter cooled system for heavy duty & hot areas
Pressure Relief Valve
Pressure Gauge 700 bar
Oil Twin line hoses length = 10 feet
Remote Control 15 ‘
Explosion proof
Weight25 kg
ModelJet Electric Pump  
JETHYTORC380VJet Elec Hydraulic pump 380V
single Port
Double Acting
Protection for over heating
Pressure Relief Valve
Pressure Gauge 700 bar
Oil Twin line hoses length = 10 feet
Remote Control 15 ‘
Weight34 kg
ModelJet Star Cooler
Jet Star CoolerElec Hydraulic pump 220V
4 Port
Double Acting
Inter cooled system for heavy duty & hot areas
Pressure Relief Valve
Pressure Gauge 700 bar
Oil Twin line hoses length = 10 feet
Remote Control 15 ‘
Weight26kg

D- Boltensioner (Pumps)

Work Experience

1Client/CompanyEgyptian Maintenance company / Gupco
Contract TitleAGR – 0867 – 350 – 150 – 12
Start Date01-Nov-12
Finish Date1/11/2014 – extend to 4/11/2015
Scope of Work ( Project Description)covering the N2 purging services
LocationEgypt
2Client/CompanyAlexandria Petroleum Maintenance (Petromaint) / Ennpi
Contract Title342 / 2013
Start Date1/1/2014
Finish Date4/11/2015
Scope of Work ( Project Description)Pre- commisioning of new project “Asil&Karam”
LocationEgypt
3Client/CompanyUnited Gas Derivatives (UGDC)
Contract TitlePC/OPR/18/10
Start Date14/10/2011
Finish Date30/4/2016
Scope of Work (Project Description)Nitrogen purging, leaktest,chemical cleaning &Mechanical services
LocationEgypt
4Client/CompanyEl Mansoura
Contract TitleCON – OPR – 2 -23/B
Start Date1/6/2014
Finish Date1/6/2016 – extend to 1/6/2018
Scope of Work (Project Description)Rental of water Injection system services
LocationEgypt
 
5Client/CompanyTanmia Petroleum Company
Contract TitleTPC 102 A – (14)
Start Date7/10/2014
Finish Date6/10/2015 – extend to 6/6/2016
Scope of Work ( Project Description)Renting pump for QSW WF station
LocationEgypt
6Client/CompanyEl Wastani
Contract Title297 – basic contract
Start Date1/9/2014
Finish Date1/9/2016
Scope of Work (Project Description)High pressure purging services
LocationEgypt
7Client/CompanyAlexandria Petroleum Maintenance (Petromaint)
Contract TitleAgreement
Start Date24-Dec-15
Finish Date24-Dec-16
Scope of Work ( Project Description)online pigging, clean , gauging, hydrostatic testing, drying and nitrogen purging , process services, mechanical services, pumping services
LocationEgypt